Radiant Energy and Solar · Commercial Division

Engineering Fieldbook — Vol. 01 / Central Florida

Commercial energy, engineered end to end.

Audit, design, and delivery for industrial facilities, farms, institutions, and commercial property across Central Florida — documented so your capital decisions hold up to scrutiny.

Rooftop solar racking and conduit runs laid out across a commercial roof during installation
Plate 01 — Rooftop racking and conduit layout, ProBev Commercial, Orlando, FL
Service area
Central Florida
Scope
Audit · Design · Delivery
Assets
Rooftop · Ground mount · Storage
Team
Full commercial installation crew

02

Beyond the electricity bill

The bill is a record of the past. The decision needs the whole picture.

Most commercial solar proposals begin and end with a monthly total. That number is the output of your operation — not the description of it. We start one layer underneath, because the project only works if the operating reality underneath it works too.

01

The bill is an output

A monthly total tells you what you paid. It does not tell you what you consumed, when you consumed it, or what drove it.

02

Demand sets the value

Peak demand, operating hours, and load shape determine how much a system can genuinely offset — and what that offset is worth.

03

Infrastructure sets the ceiling

Roof condition, available land, service capacity, and interconnection limits decide what is physically buildable on your site.

04

Capital sets the outcome

Ownership structure, incentive eligibility, and tax position determine who captures the value, and on what timeline.

We begin with the bill because that is where the data begins — not because that is where the decision ends.

03

Three specialized pathways

One practice, three entry points.

The engineering discipline is the same in each case. What changes is the decision you are making, the audience you report to, and the document you need at the end of it.

Modern industrial warehouse with a terracotta and charcoal facade

A

Commercial pathway

Industrial facilities & farms

Facilities, warehouses, processing sites, and agricultural operations with large roofs, high loads, or available acreage.

  • Audit of load, equipment, and electrical infrastructure
  • Ground-mount and distributed generation planning
  • Incentive, depreciation, and financing strategy
Aerial view of a commercial shopping center and its parking area

B

Commercial pathway

Realtors & brokers

Property-specific solar insight for buyers, sellers, landlords, and investors — without changing who owns the client relationship.

  • Opportunity mapping and joint introductions
  • Property energy overview and feasibility screening
  • Coordinated owner presentation and next steps
School campus building at sunset in Central Florida

C

Commercial pathway

Nonprofits & institutions

Schools, churches, academies, and community institutions that want energy costs redirected back into their mission.

  • Property-specific feasibility review
  • Elective Direct Pay pathway analysis
  • A financial brief for boards, donors, and committees

04

Evidence in practice

ProBev Commercial — a rooftop system delivered and documented.

Commercial work only holds up when it has been built. These are frames from a Central Florida commercial installation delivered by Radiant's own installation team.

Completed rooftop solar array on a commercial building with the installation crew still working on the roof
Plate 02 — Installed rooftop array, ProBev Commercial, Orlando, FL
Installers setting solar modules into the racking on a commercial rooftop
Plate 03 — Module installation on the roof plane
Close detail of module-level power electronics and conduit connections on a commercial rooftop
Plate 04 — Module-level power electronics and conduit routing

What the record shows

Project
ProBev Commercial
System type
Commercial rooftop solar
Location
Orlando, Florida
Delivered by
Radiant Energy and Solar commercial team
Record
Photographic documentation published in the Radiant project gallery

Production, savings, and payback figures for a given project are reported in the project-specific financial brief, not generalised across installations.

Aerial plan view of a rooftop solar array laid out on a commercial building

Plate 05 — Array layout seen from above

Read the ProBev project story

05

The engineering approach

Five phases, one accountable team.

A disciplined technical sequence: understand the operation, reduce avoidable waste, design the solution, build it under a plan intended to minimize impact on your operation, then verify what was built against what was modeled.

  1. 1

    Energy audit

    Verified consumption, peak demand, operating hours, and the equipment that drives them.

  2. 2

    Efficiency & optimization

    Efficiency opportunities identified and addressed before a system is specified.

  3. 3

    Engineering & system design

    Electrical and equipment solutions crafted around the audited profile.

  4. 4

    Implementation

    Permits, procurement, and construction managed around your operating calendar.

  5. 5

    Commissioning & performance

    Tested, inspected, and verified against the numbers in the brief.

The audit is the foundation

Before any design work begins, three analyses run in parallel. Together they describe the whole energy system rather than just the part a solar panel would touch.

Energy & load analysis

Know where energy is used and when demand peaks.

Equipment & process efficiency

Find equipment and processes where performance can improve.

Electrical infrastructure

Evaluate what powers the operation and its capacity for change.

Engineer inspecting electrical distribution equipment on a commercial site
Plate 06 — Electrical distribution equipment inspection

06

A connected energy strategy

One operating picture. Options that relate to it.

An assessment informs the efficiency review and the generation or storage options. Performance review closes the loop when a system is installed. The work is tailored to the site; not every project needs every option or follows an identical sequence.

  1. Field note 01

    Energy assessment

    Establish the operating baseline from utility history, demand, hours, equipment, and site constraints.

  2. Field note 02

    Efficiency opportunities

    Identify practical ways to reduce or shift demand before comparing supply options.

  3. Field note 03

    Solar generation / storage options

    Test on-site generation, storage, or both against the audited profile and project constraints.

    Storage is optional; each option is evaluated on its own merits.

  4. Field note 04

    Performance review

    After commissioning, compare available operating data with the model and review what it shows.

Reading the plate: assessment informs the options; review compares available operating data with the model. A project may use only the stages relevant to its needs.

07

The energy decision brief

Evaluate the financial picture before you commit capital.

A commercial energy decision is a capital decision. It deserves the same evidence any other capital decision gets: a documented baseline, a stated set of assumptions, and a sensitivity view rather than a single number.

What we need from you

  • Utility history

    Twelve months of invoices, and interval or demand data where the utility provides it.

  • Site constraints

    Roof condition and geometry, usable land, shading, and access for construction.

  • Electrical context

    Service capacity, existing generation, and any load that must stay uninterrupted.

  • Operations

    Operating hours, seasonal peaks, expansion plans, and the timeline that matters.

  • Ownership & tax

    Whether the organization owns the asset, and its position on incentives and depreciation.

What the brief can cover

  • Baseline

    A documented load and demand profile for the site.

  • Concept

    A system design sized to that profile, with alternatives where they matter.

  • Production

    An estimated generation profile with the assumptions stated openly.

  • Incentives

    Potential federal and state pathways, each with its eligibility conditions.

  • Financials

    Savings projections and payback scenarios across the assumptions that matter.

  • Scope

    A scope of work that can be reviewed, priced, and scheduled.

Modeled feasibility study

A modeled campus study, end to end

The figures below come from a Radiant Energy and Solar feasibility study for a Central Florida school campus, built from the academy's twelve months of Duke Energy usage history. They are modeled outputs for one property under the assumptions stated in that study — a simulation of what the project could look like, not measured results from a completed installation, and not a projection for your site.

Property
One Central Florida school campus
Source history
Twelve months of Duke Energy usage
Result type
Modeled outputs, not measured performance

Selected modeled outputs · one property

Modeled system size (DC)
191.84 kW
Modeled panel count
436
Modeled year-one production
278,562 kWh
Modeled average monthly bill — current
$4,312
Modeled average monthly bill — with solar
$459
Modeled year-one electricity savings
$46,232
Modeled payback period
4.1 years
Modeled 25-year electricity savings
$1,598,377
Modeled net 25-year benefit after project cost
$1,402,700
Modeled 25-year internal rate of return
23.4%

All figures are modeled estimates based on the system design, the twelve-month Duke Energy usage history and the assumptions shown in the study. Actual production, savings and utility rates will vary with weather, shading, system performance, rate changes and energy use. They are not guaranteed. Savings shown are before any maintenance, insurance or financing costs. Radiant Energy and Solar does not provide tax or legal advice.

Open the full nonprofit case

Incentive pathways that may apply

01Potential federal tax credit

Radiant coordinates planning and documentation for potential federal tax credits on qualifying commercial projects.

02Domestic content bonus

Qualifying projects that meet domestic-content requirements may unlock an additional bonus credit.

03Energy community

Eligible projects in qualifying energy communities may have access to an additional incentive pathway.

04Low-income allocation

Qualifying projects may benefit from low-income community or housing allocations.

Incentive availability, qualification, and final tax treatment depend on applicable rules and project facts. Confirm eligibility and filing decisions with qualified tax and legal advisors.

08

Why Radiant

Six reasons this is a different kind of solar company.

The difference is not the panel. It is the discipline around it: what is measured, what is documented, who is accountable, and what happens after the crew leaves the roof.

01

Engineering before proposal

We start with an audit of load, equipment, and infrastructure. The proposal is an output of that work, not the input.

02

Coordinated end to end

Site review, engineering, installation, and verification are coordinated as one sequence, with a single commercial contact point for the project.

03

Documentation for capital decisions

Where a recommendation carries a capital decision, the assumptions behind it are set out for review by a board, a lender, or a partner.

04

Central Florida depth

Work across Orlando and Central Florida, with local permitting, inspection, and utility requirements considered from the start.

05

Incentives, with the caveats stated

We document potential federal and state incentives along with the requirements attached to them, and we are explicit about the conditions that have to be met.

06

Support after activation

Monitoring, maintenance, and service options for the installed system, so modeled performance can be compared against actual output.

09

Commercial FAQ

Questions commercial decision-makers ask first.

If your question is not answered here, ask it directly. We would rather answer it before the proposal than after the contract.

How do you decide what size system my site needs?

From the audited data, not from the roof. We review your consumption and demand history, the usable roof or land area, and your operating profile, and size the system against that. The proposal states the assumptions it was built on.

What information do you need from us to start?

Typically twelve months of utility invoices, a site address, and any interval or demand data your utility can provide. If you do not have that data yet, we can tell you exactly what to request.

Do you work with our utility and local authorities?

Interconnection, permitting, and inspection requirements are handled as part of the design and approval phase. Timelines depend on your utility, your jurisdiction, and the scope of the project, so we sequence the schedule around that.

How do federal and state incentives apply to a commercial project?

A potential federal investment tax credit and, where the project qualifies, additional percentage-point bonuses may apply. Availability, qualification, and final tax treatment depend on the applicable rules and the specific facts of the project. Confirm eligibility and filing decisions with qualified tax and legal advisors.

Will installation disrupt our operations?

Commercial installations are planned around your operational schedule. Most rooftop work requires no interior access. Start times, break periods, and noise-sensitive tasks are coordinated with your team to minimize potential operational impact.

Can you evaluate a property we do not own yet?

Yes. That is exactly what our realtor and broker pathway is for — property-specific feasibility for owners, buyers, sellers, and lenders while you keep the client relationship.

Do you work with schools, churches, and community institutions?

Yes. Some tax-exempt organizations may be eligible to elect to receive eligible clean-energy credits as a direct payment under the federal elective payment provision, instead of claiming those credits through a tax return. Whether an organization qualifies, and for how much, depends on the organization, the project, and the rules in force at the time. Confirm eligibility with a qualified tax advisor. Our nonprofit pathway reviews that question for each property.

What happens after the system is commissioned?

After activation, the system can be monitored and its output reviewed against the modeled production estimate, so a divergence is visible from the monitoring data rather than from a surprise on your next invoice.

10

Commercial consultation

Start with the site. Leave with a document.

A commercial consultation is a review of your operation, not a sales visit. Tell us about the facility, the energy context, and the constraint you are trying to solve, and we will follow up with a written summary of what we find and what we recommend next.

  1. 01

    We review your site

    You share the property, the energy context, and the constraint you are trying to solve.

  2. 02

    We request the real data

    Twelve months of utility history and the site information we need to model it properly.

  3. 03

    You receive a written summary

    A summary of the scope, the assumptions, the incentive pathways, and the next decision.

COMMERCIAL CONSULTATION

Request a Commercial Energy Consultation

Tell us about your facility, energy profile, and project goals. Our commercial team will review the right engineering and financial path for your site.

By checking the boxes below, you agree to receive communications from Radiant Energy and Solar. You can unsubscribe anytime.

To process your request, we need your permission to store and process your personal data.

We care about your privacy. Learn how we handle your data in our Privacy Policy.

No obligation. We usually respond within 1 business day.

Radiant Energy and Solar Team

Opening Hours

Weekdays: 7 AM – 7 PM
Weekends: 8 AM – 6 PM

Contact Us

Phone: +1 (407) 915-2116
Email: info@radiantenergysolar.com
Location: 157 Drennen - Orlando FL